Click image to view full size image
SPECIFICATION
| Mode | Specification |
|
CHO7000 |
Input Voltage |
380 ±10%,50/60Hz,three phases |
Rated Capacity (KVA) |
22 |
|
Working Gas Pressure (Mpa) |
≤0.2 |
|
Relative Humidity (%) |
90 |
|
Rated Gas Production (L/h) |
7000 ±10% |
|
Water Consumption (L/h) |
3.8 |
|
Maximum Cutting Thickness (mm) |
200 |
|
Effective Punching Thickness (mm) |
70 |
|
Water Feed |
auto |
|
Cooling Mode |
Air Cool |
|
The Insulation Level |
F |
|
Power Supply Protection Grade |
IP21S |
|
Flame Temperature (℃) |
Adjustable 800~3200 |
|
Working Medium |
Filtered water or deionized water or soft water |
|
Working Method |
Continuous |
|
Enviroment Temperature (℃) |
0~40 |
|
Outline Dimensions - L*W*H (mm) |
1300*930*1820 |
|
Gross Weight (kg) |
520 |
|
Ventilation Space Requirement (mm) |
400 in each direction |
|
Shichun Hydrogen Oxygen Cutting Machine is a kind of gas generating equipment that uses hydrogen-oxygen gas mixture produced by water electrolysis as a fuel to replace cutting gas such as acetylene, propane, carbon three gas and liquefied gas. The principle of electrolyzed water technology, energized from the water to produce hydrogen and oxygen gas, in which hydrogen is a fuel, oxygen combustion, ignition to form a high-energy high-temperature flame, the flame temperature up to 2800 degrees, and the flame concentration is not divergent, can quickly cut steel plate, speed and acetylene equivalent, The cost is lower than acetylene by more than 50%, and there is no pollution. It is an energy-saving and energy-reducing product promoted by the 11th Five-Year Plan.
At present, oxyhydrogen cutting machines have been widely used in flame cutting of continuous casting billets in steelmaking plants, shipbuilding in shipyards, shipbreaking, steel structure engineering, machinery manufacturing, and separation of end-of-life vehicles.
http://www.shichunenergy.com/